Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterVideo Inspection in Dallas, TX
Duct video inspection in Dallas uses a small camera mounted on a flexible rod to photograph and record the inside of every duct run before any Air Duct Cleaning services begins. The camera shows exactly what is present – debris load, mold growth, rust, disconnected joints, or collapsed sections – so you receive a written scope of work based on documented evidence, not a technician’s verbal estimate. If a competitor has handed you a quote without putting a camera inside your ducts first, bring that quote to us and we’ll put our own number next to it in writing, at no cost to you.
At CleanRun Duct Repair & Cleaning, video inspection is not an add-on or an upsell. It is the first step in every job we do, and it has been since Tomas Reyes established the company in 2013. Every run gets photographed before our equipment touches it, and every customer receives that photo record as a standard job deliverable – not as a courtesy, but because Haven Standard Clause 1 requires a written price grounded in evidence, and you cannot write an honest price without first knowing what you are pricing. To learn more about how video inspection fits into the full service, visit our Air Duct Cleaning in Dallas page.
Call (469) 405-6133 and a live person will answer – not a voicemail, not a callback queue. We’ll schedule a time, send a background-checked, uniformed technician identified by name before arrival, and deliver a written price before a single panel comes off.
When You Need Video Inspection
Most Dallas homeowners don’t think about what’s inside their ducts until something forces the question. These are the situations where video inspection stops a guessing game and produces an actual answer:
- You’re getting inconsistent airflow between rooms. When the bedroom in the back of a Preston Hollow or Lake Highlands home runs noticeably warmer than the front rooms, a camera can show within minutes whether the cause is a collapsed duct section, a disconnected elbow, or debris blocking the run at a specific point – rather than spending money replacing equipment that isn’t the problem.
- Your home was built before 1990 or has never had documented duct work done. Older Dallas construction in neighborhoods like Oak Cliff and East Dallas frequently used fiberglass duct board that degrades over time. The camera tells you what condition the lining is actually in before you decide whether cleaning or replacement is the right call.
- You’ve bought a resale home and there’s no service history. A significant portion of the homes we inspect in the Dallas metro were purchased between 2018 and 2024 at prices where the buyers reasonably expected documented maintenance. Many had none. A pre-service camera run is the only way to establish a baseline.
- There’s a persistent smell – musty, burnt, or otherwise – that hasn’t cleared after filter changes. Dallas humidity, particularly in the months between April and October, creates conditions where moisture finds its way into duct systems during periods of high demand on the air handler. The camera locates where, which is the only useful information when you’re trying to decide whether you’re dealing with surface dust, mold growth, or a dead animal in the run.
- A contractor recently finished renovation work in your home. Drywall dust and construction debris travel into duct systems through registers left open during work. We see this regularly in homes where kitchens or bathrooms were remodeled in Dallas neighborhoods like M Streets, Bishop Arts, and North Dallas. The camera shows how far the debris traveled and which runs are affected.
- You received a very low quote from another company and want to know what they found before agreeing to it. We offer a free second opinion on any written estimate. Bring us the competitor’s paperwork; we’ll inspect the ducts and put our price in writing beside theirs so you can compare what you’re actually buying.
Our Video Inspection Process
The inspection sequence at CleanRun is built so that every finding is documented in the order it’s found, and so that you can follow along if you want to. There is no moment where you’re asked to trust a technician’s word without a corresponding image to support it.
- Written scope review before the camera goes in. Before the technician accesses any duct, they walk the home, identify the number of runs, note the system configuration – supply side, return plenum, air handler location – and record the home’s age and duct material type. The plenum is the central distribution box the air handler feeds; knowing its condition before camera work begins shapes what we’re looking for in each branch run. This walkthrough is documented and becomes part of the job record.
- Camera access at each register. The technician removes each supply and return register and inserts a flexible inspection camera – the same type used in professional duct inspection, not a consumer-grade borescope – into the run. The camera captures still photos and video of the duct interior from the register opening toward the plenum. In a typical Dallas single-family home with 10 to 18 runs, this step takes 45 to 75 minutes to do correctly.
- Real-time findings documented and explained to you. As the camera moves through each run, the technician narrates and documents what’s visible. If the camera shows a 2-inch debris accumulation at the first elbow, you see the image as it’s captured. If there’s a disconnected joint at a branch takeoff, it’s photographed and its location in the home is noted. Nothing gets filtered before you see it.
- Written findings report assembled on-site. Before the technician leaves, every finding is compiled into a written report that includes the photographs, the location of each finding within the duct system, and a plain-language description of what the camera found. This is not a sales document. It’s a condition report – the same type of documentation you’d expect from a structural inspector.
- Written price delivered before any work begins. If the inspection reveals cleaning, repair, or other service is warranted, you receive a written price covering the full scope before any equipment is operated. Haven Standard Clause 1 means there is no “we’ll figure out the cost when we’re done.” The price is in writing before anything starts. If you decide not to proceed, the inspection documentation is yours regardless.
- Post-service photo record delivered as a standard deliverable. If you authorize the work, every run is photographed again after cleaning. The before-and-after record – covering every single run in the home – is delivered to you as part of the standard job completion. It’s the only honest way to show the difference between work that was done and work that was claimed.
BeforeAfterVideo Inspection Pricing in Dallas
Video duct inspection in Dallas typically runs between $75 and $150 as a standalone service. When inspection is performed as part of a full CleanRun cleaning or repair job, it is included in the written job price – it is not billed separately on top of the cleaning cost. The inspection is the precondition for the price, not an additional line item.
Several factors affect where a specific home lands within that range:
- Number of runs: A smaller Dallas townhome with 8 runs takes less camera time than a 4,000-square-foot home in Preston Hollow or Lakewood with 20 or more runs. Larger systems with more branch runs require more time to inspect thoroughly.
- System access complexity: Homes where duct runs pass through attic crawl spaces, tight utility chases, or finished ceilings take longer to access safely. Some older Dallas construction has duct configurations that require working in multiple sections of the attic rather than from a single access point.
- Duct material type: Flexible duct – commonly called flex duct – behaves differently under a camera than rigid sheet metal or duct board. Flex duct inspection requires more careful camera positioning to get useful images, which adds time.
- Findings complexity: If the first several runs show significant debris, suspected mold, or structural issues, the inspection slows down because additional documentation is warranted. Speed is not a value we trade against accuracy.
The written price you receive reflects exactly what we found and exactly what addressing it will cost. There is no “base price plus whatever we discover.” Tomas Reyes built CleanRun’s pricing structure around the principle that a customer who understands what they’re buying makes a better decision – and that starts with a number on paper before any work begins. Call (469) 405-6133 to schedule an inspection and get your written price.
What the Camera Actually Finds in Dallas Homes
Dallas presents a specific set of duct conditions that we document repeatedly across the metro, and it’s worth naming them plainly because they affect what an inspection is likely to find in your home.
The Dallas-Fort Worth climate runs HVAC systems harder and longer than most of the country. Summer cooling loads in Dallas regularly push systems to run 12 or more hours per day from June through September. That operational demand accelerates debris accumulation inside ducts and creates the temperature differential at coils that draws moisture inward when humidity spikes – which it does reliably in spring and early fall. In Garland and Mesquite, where we see a higher proportion of slab-on-grade construction with under-slab duct routing in older homes, the camera frequently shows debris accumulation from soil infiltration at joints – a finding that’s essentially specific to that construction type and that climate combination.
In newer construction – homes built in Frisco, Allen, and Prosper between 2010 and 2022 – the camera more often shows flex duct that was installed with kinks or sags that restrict airflow. The duct itself isn’t dirty; it’s kinked at a joist or sagging between hangers in the attic. That finding is invisible without a camera and doesn’t show up in airflow measurements alone.
Debris composition matters too. In Dallas proper, especially in homes near construction corridors like those along the I-35 rebuild or the ongoing Uptown development, construction dust infiltration is common enough that we treat it as a baseline assumption in homes built or renovated between 2019 and 2024. The camera shows whether that dust has traveled into the branch runs or stayed near the registers.
We use Nikro equipment on the extraction side of cleaning jobs following inspection. Knowing what the camera found determines which Nikro tool configuration is appropriate – whether we’re moving fine particulate or dealing with heavier debris, whether negative-pressure extraction is sufficient or whether agitation is needed first. Negative-pressure extraction means we create a controlled vacuum in the duct system that pulls debris toward a collection point rather than dispersing it through the home. The camera finding drives that decision directly.
Documentation You Receive After Inspection
The job record CleanRun delivers after every inspection includes specific, named deliverables. These aren’t described vaguely as “documentation” – they are defined items:
- Pre-service photo record: Still images from the camera at each duct run, labeled by register location, showing the interior condition at time of inspection. Every run, not a representative sample.
- Written findings report: A plain-language description of what was found in each run, including the location of any debris concentration, structural findings, or growth, with the corresponding photos attached.
- Written scope of work: If cleaning or repair is warranted, a written description of exactly what will be done, which runs will be serviced, and by what method.
- Written price: A fixed price for the full scope, delivered before work begins – Haven Standard Clause 1, on every job without exception.
- Post-service photo record: After any authorized work is complete, a second set of photographs of every run showing the after condition. This is the evidence that work was done, not just that a truck was parked in front of your home for two hours.
- 365-Day Done Right Promise in writing: The warranty that backs the work. If something isn’t right within 365 days of the service date, we make it right. This is stated on the job record as a written commitment, not referenced verbally and forgotten.
These deliverables exist because Tomas Reyes’s view from day one has been that a customer who has the documentation can verify the work independently, refer back to it when they sell the home, and hold the company accountable if something was missed. That accountability is the point.
FAQs – Video Inspection in Dallas
How much does duct video inspection cost in Dallas?
Standalone duct video inspection in Dallas typically costs between $75 and $150, depending on the number of runs, duct material, and access complexity. When inspection is performed as part of a CleanRun cleaning or repair job, it is included in the written job price rather than billed separately. You receive your written price before any work begins – call (469) 405-6133 and we’ll give you a fixed number in writing after assessing your system.
Does every duct cleaning company do video inspection first?
No. Many companies – particularly those advertising $79 or $99 promotional packages in Dallas – do not perform camera inspection before cleaning. Without camera inspection, there is no documented baseline, no way to write an accurate scope, and no way to verify after the job whether anything changed. CleanRun has performed camera inspection as the first step of every job since 2013 because a written price cannot be accurate without evidence of what’s being priced.
Can I see the camera footage during the inspection?
Yes. The technician narrates and shows findings in real time as the camera moves through each run. Nothing is reviewed or filtered before you see it – if the camera shows a debris accumulation at an elbow or a disconnected joint at a branch takeoff, you see that image as it’s captured. The full photo record from every run is then delivered to you as part of the job documentation.
What happens if the inspection finds something that needs repair, not just cleaning?
The written findings report will identify the specific location and nature of the issue – a disconnected joint, a collapsed section, a breach in the duct lining. A written price for the repair is delivered before any work starts. You can authorize the repair, decline it and take the documentation, or request a second opinion from another company. If you want a second opinion first, bring a competitor’s written estimate back to us and we’ll put our price next to it in writing at no cost to you.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Dallas, serving Dallas.