Air Duct Cleaning in Irving - One Flat Price, Before-and-After Photos

Air Duct Cleaning in Irving, TX

HVAC cleaning in Irving typically runs $350-$650 for a complete system, with air quality and sanitizing services adding $200-$500 depending on whether we’re treating mold in a Valley Ranch flex-duct belly-sag or installing UV lights in a Las Colinas commercial air handler. We’re CleanRun Duct Repair & Cleaning, and our crews work Irving’s split market daily: the aging 1980s residential stock in Valley Ranch and the high-rise commercial systems along Las Colinas Boulevard. Every job starts with a written price before a panel comes off, and every duct run is photographed before and after. Call (469) 405-6133 for a free estimate.

Call (469) 405-6133

Why Irving Homes Are Different

Irving’s housing market sits on two timelines that rarely overlap. Valley Ranch, built out roughly 1983 to 1998, is now filled with original flex-duct installations hitting 25 to 40 years of service. The inner liners are breaking down from attic temperatures that push 150-160°F through July and August, and the support strapping has loosened as North Texas expansive clay soil shifts slab foundations underneath. We’ve found standing water and mold colonies in belly-sags so severe the duct has lost more than half its original diameter.

North Irving’s older neighborhoods carry a different problem: metal trunk-and-branch systems from the 1950s through 1970s with degraded internal fiberglass lining that sheds particles directly into the airstream. Meanwhile, homes and offices downwind of DFW International Airport’s flight corridors accumulate jet-exhaust particulates and elevated fine PM2.5 at rates measurably higher than inland suburbs like Garland or Richardson. The December through February mountain cedar pollen season is among the worst in the country, and we see heavy post-season demand as pollen loads overwhelm return-air filtration and settle deep into trunk lines.

Our Main Irving Services

Irving homeowners call us most often for these three services. Each has its own dedicated Irving page with deeper detail on local conditions and pricing.

Air Duct Cleaning in Irving

We clean the full duct network: supply and return runs, trunk lines, and plenum boxes, using negative-pressure extraction (a sealed vacuum system that pulls debris out without releasing it into your home). In Valley Ranch, we regularly photograph heavy pollen compaction at the first elbow and fiberglass liner degradation in older North Irving metal systems. Air Duct Cleaning in Irving covers our full process and Irving-specific pricing.

Dryer Vent Cleaning in Irving

Lint accumulation in dryer vents is a leading cause of house fires, and Irving’s older homes often have vent runs that exceed 25 feet through attic spaces, compounding the risk. We clean the full vent path from the dryer connection to the exterior termination, with a written scope and photo documentation. Dryer Vent Cleaning in Irving has full details on multi-story and long-run pricing.

Duct Repair & Sealing in Irving

Valley Ranch’s original flex-duct is now at the age where replacement outperforms repeated repair: sagging mid-span, joint separation from foundation shift, and crushed runs from decades of attic traffic. We assess whether sealing or replacement is the better investment, with a written price for either path. Duct Repair & Sealing in Irving explains our evaluation process.

Before

After

HVAC Cleaning in Irving

Irving’s climate and housing stock create specific HVAC cleaning needs that differ from newer DFW suburbs. Attic temperatures of 150-160°F for months each summer bake evaporator coils and blower assemblies, while the fine PM2.5 from DFW Airport’s flight corridors coats condenser fins and heat exchanger surfaces at accelerated rates. Valley Ranch’s aging flex-duct systems often leak conditioned air before it reaches the registers, forcing the air handler to run longer and dirtier. HVAC Cleaning covers our full equipment and methodology.

Evaporator Coil Cleaning

Signs you need it

Ice formation on the coil, weak airflow from registers, or a musty smell when the AC cycles on in Irving’s humid summer months.

What it costs in Irving

Evaporator coil cleaning in Irving typically runs $180-$340.

How we do it

We remove the coil access panel, apply foaming cleaner formulated for aluminum fins, rinse with low-pressure water to avoid fin damage, and photograph the coil before and after.

Blower Cleaning

Signs you need it

Vibration or noise from the air handler, uneven airflow room to room, or dust puffing from registers when the system starts.

What it costs in Irving

Blower assembly cleaning in Irving typically runs $150-$280.

How we do it

We remove the blower motor and wheel, clean each blade and the housing with compressed air and solvent, balance the wheel, and reinstall with a photo record of the cleaned assembly.

What HVAC Cleaning Costs in Irving

How do I know my HVAC system needs cleaning versus just a filter change?

If you’re changing filters on schedule but still seeing dust accumulation on furniture within days of cleaning, or if rooms furthest from the air handler stay warmer in summer, the internal components are likely dirty enough to restrict airflow and efficiency. Call (469) 405-6133 and we’ll inspect the coil and blower with a camera, show you what we find, and give you a written price before any work starts.

Can HVAC cleaning fix the musty smell when my AC runs?

A musty smell usually indicates microbial growth on the evaporator coil or in the condensate pan, both of which we clean and treat; if the odor persists, we may recommend air quality sanitizing to address deeper contamination in the ductwork itself. Call (469) 405-6133 for a camera inspection and written estimate.

Air Quality & Sanitizing in Irving

Irving’s combination of airport-adjacent PM2.5, intense mountain cedar pollen, and Valley Ranch’s condensation-prone flex-duct belly-sags creates conditions where standard cleaning leaves active microbial problems untreated. Our air quality work addresses what’s alive in the system, not just what’s loose. Air Quality & Sanitizing details our full treatment protocols.

Mold Treatment

Signs you need it

Visible mold at registers or in the plenum, a persistent earthy odor, or recent water intrusion in the attic or crawl space.

What it costs in Irving

Mold treatment in Irving typically runs $400-$800 depending on the extent of contamination and accessibility.

How we do it

We apply an EPA-registered antimicrobial through the full duct network, treat the plenum and air handler with a contact spray, and run negative-pressure extraction to remove dead spores and residue.

UV Light Installation

Signs you need it

Recurring mold or bacterial growth despite cleaning, or a household member with respiratory conditions aggravated by HVAC cycling.

What it costs in Irving

UV light installation in Irving typically runs $300-$600 including the lamp and power supply.

How we do it

We mount a UV-C lamp in the supply plenum where it irradiates the coil and drain pan continuously, wire it to the air handler’s 24V circuit, and show you the installation in our photo record.

What Air Quality & Sanitizing Costs in Irving

Is mold in my ducts common in Irving?

More common than in newer suburbs: Valley Ranch’s original flex-duct has lost support strapping over decades of clay-soil foundation movement, creating belly-sags where condensation pools and mold colonizes; we find active growth in roughly one of every four Valley Ranch systems we inspect. Call (469) 405-6133 for a camera inspection and written treatment price.

Will UV lights actually prevent mold from coming back?

A properly installed UV-C lamp in the supply plenum keeps the evaporator coil and drain pan sterile, which eliminates the primary mold reservoir in most HVAC systems; it does not treat the ductwork itself, so existing contamination must be cleaned first. Call (469) 405-6133 and we’ll assess whether UV makes sense for your specific system layout.

Brands We Service in Irving

Our crews carry parts and use equipment from Nikro, Honeywell, Aprilaire, and Abatement Technologies on Irving jobs. We stock common UV lamp sizes and antimicrobial formulations locally, so most air quality treatments don’t wait on a Dallas-Fort Worth office delivery. our brands

Pricing for Air Duct Cleaning in Irving, TX

Neighborhoods We Serve in Irving

We schedule Irving jobs with routing from our Dallas-Fort Worth office, and most appointments are available within three to five business days. Our crews are background-checked, uniformed, and identified by name before arrival under Haven Standard Clause 3: Verified Crews.

• Valley Ranch
• Las Colinas
• North Irving (older 1950s-1970s stock)
• Barton Estates
• Plymouth Park

Service Area - Cities Near Irving

Our crews serve the full Dallas-Fort Worth metro from the same dispatch office, including Dallas, TX to the east, Mesquite, TX to the southeast, Grand Prairie, TX to the southwest, and Richardson, TX to the north. Each city page has local pricing and conditions specific to that market.

FAQs About Air Duct Cleaning in Irving