Air Duct Cleaning in Arlington - One Flat Price, Before-and-After Photos

Air Duct Cleaning in Arlington, TX

Complete HVAC cleaning in Arlington typically runs $380-$680 for a whole-house system, with air quality and sanitizing services adding $220-$450 depending on contamination level and accessibility. We dispatch crews from our Dallas-Fort Worth office to serve Arlington homes directly, and every job starts with a written price before any panel comes off. Call (469) 405-6133 for a free estimate.

Call (469) 405-6133

Arlington’s housing stock shapes what we find. The city built fast between 1965 and 1990, much of it during the post-Six Flags boom, and the original fiberglass duct board or first-generation flex duct in those homes is now at or past its 15-25 year service life. When we open a plenum - the central distribution box where all duct runs connect - in a south Arlington home built in 1978, we expect to find delaminating grey board, loose flex joints, and debris loads that reflect decades of thermal stress in 140°F attics.

Why Arlington Homes Are Different

Arlington sits on Blackland Prairie expansive clay, locally called “black gumbo.” This soil swells with spring rains and contracts through summer drought, producing the micro-shifts that crack duct board seams and pull flex duct joints loose at plenums. We see it in neighborhoods from Pantego to southwest Arlington: systems actively venting conditioned air into the attic while pulling attic debris, insulation fibers, and mold spores back into the living space. This is a local geology problem, not simply age.

The climate compounds it. Arlington HVAC systems run 8-9 months under heavy load, with attic temperatures reaching 140-160°F in July and August. That thermal cycling degrades flex duct outer wrap and crumbles original duct board insulation. Spring and fall humidity, combined with cedar, oak, and ragweed seasons, loads ducts with allergens faster than in drier Sun Belt markets. In the rental corridors near UT Arlington, deferred-maintenance apartment complexes present heavily contaminated systems rarely cleaned between tenants.

Our Main Arlington Services

Arlington homeowners call us most often for these three services, each with its own dedicated Arlington page.

Air Duct Cleaning in Arlington

We clean every duct run - the individual supply and return lines - with negative-pressure extraction, photographing the interior before and after. Arlington’s original grey fiberglass duct board, still in place in 1972-1984 construction, sheds microfibers into the air stream once delamination begins. Our crews document the condition of each run so you see what the camera showed. Air Duct Cleaning in Arlington covers the full scope, pricing, and what to expect.

Dryer Vent Cleaning in Arlington

Lint accumulation in dryer vents is a documented fire hazard, and Arlington’s older tract homes often have runs exceeding 25 feet with multiple elbows that trap debris. We remove the vent line, rotary-brush the full length, and measure airflow before and after. Every job includes a written airflow report. Dryer Vent Cleaning in Arlington has full details.

Duct Repair & Sealing in Arlington

Foundation movement from black gumbo soil separates joints and cracks plenums. We repair or replace damaged duct board, seal joints with mastic - not tape - and pressure-test the system to verify no attic air is entering the return. Duct Repair & Sealing in Arlington explains our repair standards and warranty.

Before

After

HVAC Cleaning in Arlington

Arlington’s 8-9 month cooling season and 140°F attic temperatures mean evaporator coils and blowers operate under continuous load, collecting the pollen, dust, and mold spores that slip past standard filters. We clean the full air handling system, not just the ducts, because a clean coil does more for efficiency than duct cleaning alone. HVAC Cleaning covers our complete equipment roster and standards.

Evaporator Coil Cleaning

Signs you need it

Ice buildup on refrigerant lines, weak airflow from registers, or cooling that can’t keep up after 2 PM in July.

What it costs in Arlington

Evaporator coil cleaning typically runs $180-$320, with access difficulty and contamination level setting the final price.

How we do it

We remove the coil if accessible, apply foaming cleaner, rinse with low-pressure water, and photograph before and after through the access panel.

Blower Cleaning

Signs you need it

Vibration noise at startup, dust puffing from registers when the fan engages, or uneven heating and cooling across rooms.

What it costs in Arlington

Blower assembly cleaning ranges $160-$280 depending on whether the motor requires removal for proper access.

How we do it

We pull the blower assembly, clean the wheel and housing with compressed air and solvent, balance the wheel, and document amp draw before reassembly.

What HVAC Cleaning Costs in Arlington

Can HVAC cleaning lower my summer electric bill in Arlington?

A clean evaporator coil and blower can restore 10-15% of lost cooling efficiency, which matters when your system runs 8-9 months under Arlington’s load. We measure static pressure before and after to document the improvement. Call (469) 405-6133 for a free estimate.

How do I know the coil was actually cleaned?

Our Documented Photo Record shows the coil surface before and after, with a dated timestamp, as part of every HVAC cleaning job record under Haven Standard Clause 2. You receive the photos; we keep the backup.

Air Quality & Sanitizing in Arlington

Arlington’s humidity swings and dense allergen loads - cedar in winter, oak and ragweed in spring and fall - create conditions where mold and bacteria colonize duct interiors, especially in the original fiberglass duct board found in 1970s-1980s homes. Air quality and sanitizing treats the biological contamination that mechanical cleaning alone cannot remove. Air Quality & Sanitizing details our full protocol.

Mold Treatment

Signs you need it

Musty odor when the system engages, visible growth at registers, or aggravated allergy symptoms that worsen when you’re home.

What it costs in Arlington

Whole-system mold treatment runs $280-$450 depending on contamination extent and whether duct replacement is recommended.

How we do it

We apply EPA-registered antimicrobial through the duct system, treat the plenum and all runs, and collect post-treatment samples for documentation.

UV Light Installation

Signs you need it

Recurring mold despite cleaning, high humidity in the air handler, or family members with persistent respiratory irritation.

What it costs in Arlington

UV-C light installation at the coil typically costs $320-$480 including the lamp, housing, and electrical connection.

How we do it

We mount a Honeywell or Aprilaire UV-C lamp at the coil surface, wire to the blower circuit, and verify irradiance with a meter.

What Air Quality & Sanitizing Costs in Arlington

Is mold in ducts common in Arlington?

Yes, especially in 1970s-1980s homes with original fiberglass duct board where foundation movement has opened seams to humid attic air. We find active growth in roughly one-third of Arlington systems over 25 years old. Call (469) 405-6133 and we’ll inspect with the camera at no charge.

Do UV lights actually work in North Texas humidity?

UV-C at the coil surface prevents mold and biofilm buildup, which is the primary failure point in humid climates; it does not sterilize moving air, so we specify it for coil protection, not whole-house air purification.

Brands We Service in Arlington

We stock parts and service equipment from Honeywell, Aprilaire, and Abatement Technologies, with Nikro cleaning systems on every truck. Most Arlington repairs complete same visit because our crews carry the common blower motors, capacitors, and UV lamps found in local installations. See our brands for the full equipment roster.

Pricing for Air Duct Cleaning in Arlington, TX

Neighborhoods We Serve in Arlington

We schedule Arlington jobs by cluster to minimize drive time between appointments, with crews typically covering south and central neighborhoods one day, north Arlington and Pantego the next. Response to initial calls is same-day during business hours; scheduling for non-urgent work usually falls within 3-5 days.

• Pantego
• Interlochen
• South Arlington (near Sublett Road)
• North Arlington (near I-30 corridor)
• UT Arlington rental district

Service Area - Cities Near Arlington

Our Dallas-Fort Worth office dispatches crews throughout the metroplex. We regularly serve Grand Prairie, TX to the east, Euless, TX to the northeast, Grapevine, TX to the north, and Dallas, TX for larger commercial or multi-system residential jobs. Travel time is built into every written estimate with no separate fuel surcharge.

FAQs About Air Duct Cleaning in Arlington