Air Duct Cleaning in Plano - One Flat Price, Before-and-After Photos

Air Duct Cleaning in Plano, TX

HVAC cleaning in Plano typically runs $350-$650 for a full system, with air quality and sanitizing work adding $200-$450 depending on scope. We’re CleanRun Duct Repair & Cleaning, and we dispatch crews to Plano from our Dallas-Fort Worth office - every job starts with a written price before any panel comes off, and every duct run is photographed before and after. Call (469) 405-6133 for a free estimate.

Call (469) 405-6133

Why Plano Homes Are Different

Plano’s explosive suburban build-out of the 1980s and 1990s left the city with one of the densest concentrations of 30-to-45-year-old flex-duct systems in North Texas - ductwork that has spent decades baking in attics that routinely hit 150°F+ every summer, degrading the inner plastic liner and insulation wrap and allowing attic particulates to infiltrate the air stream. Unlike neighboring Frisco or McKinney, which grew primarily in the 2000s-2010s with newer materials, Plano’s dominant housing cohort is now old enough that original ductwork is reaching or past its useful life at scale.

The vast majority of Plano’s residential stock consists of slab-on-grade tract homes built between roughly 1975 and 2000, most with flexible ductwork routed through unconditioned attics. A significant share of 1970s-1980s homes also use open wall-cavity returns - stud bays lined only with drywall that serve as return-air plenums - which accumulate wall-cavity debris and are frequently missed or mishandled during a cleaning visit. North Texas delivers a nearly year-round allergy gauntlet - mountain cedar in December through February, oak and elm in spring, and ragweed in fall - that keeps airborne particulate loads unusually high and gives Plano homeowners repeated, seasonal motivation to address duct contamination.

Our Main Plano Services

Most Plano calls fall into three categories. Each has its own dedicated page with full pricing and scope details.

Air Duct Cleaning in Plano

We clean supply and return duct runs with negative-pressure extraction - a vacuum system that pulls debris out while agitation tools loosen buildup - and we photograph every run before and after. In older Plano neighborhoods, we regularly find collapsed flex duct at attic joist crossings where thermal cycling has torn the inner liner, pulling blown-in insulation fiber directly into supply runs. Air Duct Cleaning in Plano covers full residential system pricing and what we document on every visit.

Dryer Vent Cleaning in Plano

Lint accumulation in dryer vents is a leading cause of residential fires, and Plano’s older homes often have longer vent runs through attics or crawl spaces that complicate access. We clean the full vent path from the back of the dryer to the exterior termination, measure airflow before and after, and provide a written report. Dryer Vent Cleaning in Plano details our scope and flat-rate pricing.

Duct Repair & Sealing in Plano

When flex-duct liners have degraded past cleaning, we replace damaged sections with new insulated duct, seal joints with mastic, and pressure-test the system to verify integrity. East Plano homes from the 1980s frequently need partial replacement at joist crossings where the duct has collapsed. Duct Repair & Sealing in Plano explains our repair scope and how we price it.

Before

After

HVAC Cleaning in Plano

Plano’s six-to-eight-month cooling season pushes evaporator coils and blower assemblies to work harder than equipment in milder climates, and the city’s 30-to-45-year-old flex-duct systems often leak conditioned air into superheated attics before it ever reaches the registers. HVAC Cleaning addresses the full air-handling system - not just the ducts - to restore airflow, efficiency, and indoor air quality in homes where the equipment has been fighting North Texas heat and pollen loads for decades.

Evaporator Coil Cleaning

Signs you need it

Ice buildup on the coil, weak airflow from registers, or AC running continuously without reaching set temperature - common in Plano homes where cottonwood and oak pollen coat the coil fins each spring.

What it costs in Plano

Evaporator coil cleaning typically runs $180-$320 in Plano, with access difficulty (attic-mounted air handlers in older homes) affecting the final written price.

How we do it

We remove the access panel, apply foaming cleaner to the coil fins, rinse with low-pressure water to avoid fin damage, and photograph the coil before and after - the photo record is delivered with the job documentation.

Blower Cleaning

Signs you need it

Dust puffing from registers at startup, uneven airflow room to room, or a blower motor laboring louder than usual - often caused by debris buildup on the squirrel-cage wheel in homes with neglected return filtration.

What it costs in Plano

Blower assembly cleaning typically runs $150-$280 in Plano, with price set after we verify whether the blower is accessible from the air handler or requires duct disassembly.

How we do it

We power down the unit, remove the blower assembly, clean the wheel and housing with compressed air and soft brushes, balance the wheel on reassembly, and run a post-cleaning amp draw to confirm the motor isn’t overworking.

What HVAC Cleaning Costs in Plano

How do I know my HVAC system needs cleaning versus just the ducts?

If your registers blow weak or warm air despite clean ducts, the restriction is likely at the coil or blower - we inspect both with a camera before quoting, so the written price covers exactly what we find. Call (469) 405-6133 and we’ll schedule a no-charge look.

Will cleaning my evaporator coil fix my high summer electric bills in Plano?

A dirty coil can raise cooling costs 15-30% by forcing longer run times, but we measure temperature split before and after cleaning to prove improvement - the photo record and written readings are part of every job.

Air Quality & Sanitizing in Plano

Plano’s year-round pollen cycle and decades-old flex-duct systems create conditions where biological growth and persistent odors take hold in ways that standard cleaning alone won’t address - the same attic heat that degrades duct liners also creates humidity pockets at unsealed joints where mold can establish. Air Quality & Sanitizing targets these problems with treatments applied after mechanical cleaning, documented with before-and-after photos and backed by our 365-Day Done Right Promise.

Mold Treatment

Signs you need it

Musty odor at startup, visible discoloration on registers or duct liner, or aggravated allergy symptoms when the system runs - particularly common in Plano homes with attic moisture intrusion at degraded flex-duct joints.

What it costs in Plano

Whole-system mold treatment typically runs $400-$750 in Plano, with extent of growth and accessibility of affected duct runs determining the final written scope.

How we do it

We apply an EPA-registered antimicrobial through the duct system using a fogging device, treat affected registers and plenum surfaces by hand, and verify application coverage with UV dye visible in the photo record.

UV Light Installation

Signs you need it

Recurring mold or biofilm growth despite prior cleaning, or a household member with compromised immunity who needs continuous air-stream sterilization - a situation we see increasingly in Plano’s aging housing stock.

What it costs in Plano

UV-C light installation at the evaporator coil typically runs $350-$600 in Plano, including the lamp, mounting hardware, and electrical connection to the air handler.

How we do it

We mount a Honeywell or Aprilaire UV lamp upstream of the coil, wire it to the air handler’s 24V circuit with an independent switch, and show the customer the installed position in the photo record before closing the panel.

What Air Quality & Sanitizing Costs in Plano

Does mold treatment require me to leave my Plano home?

No - we use EPA-registered products rated for occupied spaces, ventilate the home for 30 minutes post-treatment, and provide the safety data sheet with your job documentation. Call (469) 405-6133 to schedule.

How long does UV light installation take?

Most coil-mounted UV installations finish in 90-120 minutes, with power shut down at the breaker during electrical work and tested restoration before we leave - the written scope includes lamp replacement schedule and warranty terms.

Brands We Service in Plano

We stock filters, UV lamps, and replacement media for Honeywell, Aprilaire, and Abatement Technologies systems - the brands most commonly found in Plano homes built from the 1980s through the 2000s. Most parts are available same-day from our Dallas-Fort Worth inventory; specialized orders typically arrive within 48 hours. See our brands for the full equipment roster.

Pricing for Air Duct Cleaning in Plano, TX

Neighborhoods We Serve in Plano

We work across Plano’s full residential footprint, from the established streets of East Plano to the newer developments west of Preston Road. Crews are dispatched from our Dallas-Fort Worth office, and most Plano appointments are scheduled within a 2-3 day window.

• East Plano / Liberty Park area
• Parker / Chase Oaks
• Willow Bend
• Whiffletree
• West Plano / Prestonwood

Service Area - Cities Near Plano

CleanRun serves the full Dallas-Fort Worth metro from our central office, with Plano as a core dispatch zone. Homeowners in Richardson, TX - directly south of Plano - often share the same 1970s-1990s housing stock and flex-duct challenges. We also work regularly in Carrollton, TX to the southwest, Garland, TX to the southeast, and Rowlett, TX along the eastern lake corridor. Each city has its own conditions, and our written prices reflect what we find on site - never a generic rate card.

FAQs About Air Duct Cleaning in Plano